Generative Design for Additive Manufacturing Answer Of Coursera Quiz. In this post you will get Correct Quiz & Assignment Answer of Generative Design for Additive Manufacturing
Generative Design for Additive Manufacturing
Offered By ”Autodesk”
N.B. We attempted our best to keep this site refreshed for our clients for nothing. You can likewise contribute by refreshing new inquiries or existing inquiry answer(s). There are numerous inquiries on our site, it is difficult for us to check them consistently. It will be extraordinary on the off chance that you can assist us with updating the site. Just let us know if you find any new questions through mail or comment . We will attempt to refresh the inquiry/answer ASAP.
Week 1 quiz
In addition to applying dimensions to a sketch, what is another option to define the location and orientation of a sketch entity such as a line?
Which feature is used to join solid bodies together outside of a feature operation type?
When a component is copied and pasted in a design, what feature is automatically activated to help position the copy?
- Capture Position.
How does activating a component change the timeline?
- Timeline will remain the same.
- Timeline will only show new features created.
- Timeline will show all features in a design but highlight those belonging to the active component.
- Timeline will only show features created while a component is active.
When creating avoidance geometry for hardware which of the following things should be considered? Select all that apply
- Size of the hardware.
- Color or plating of the hardware.
- Installation of the hardware.
- Tool access for the hardware.
Week 2 quiz
What value is a generative study set to the “Minimize Mass” objective trying to converge upon?
Factor of Safety.
Obstacle and preserve regions are a critical step in the setup and fundamental understanding of a generative design study. What best describes an obstacle when setting up a new generative design study?
The maximum load a design will see.
Clearance for a tool to access hardware.
The starting shape of a design.
The mounting holes to attach a design to something.
When setting up a CNC mill manufacturing method for 3axis machining what is the restriction on tool direction?
No restriction, a design can be created to be machined from all 6 directions.
You can only select 2 directions, the positive and negative of a single axis.
You can only select 1 direction.
You can select up to 3 directions using 3 axis machining.
When working inside Explore to view generative outcomes at what iteration can you begin to view results live?
In Edit Model, if you mirror a component how is the new geometry organized in the browser?
You can only mirror bodies, not components.
New bodies are created in the same component.
A new component is created.
New bodies are created in the top-level Model Components folder.
Week 3 quiz
How do you manipulate the objective ranges to easily filter the outcome thumbnails in Explore?
Use the sliders to adjust the range.
Manually enter a value for each range.
Values are fixed and can’t be adjusted.
Objective ranges is not an option in Explore.
How many outcomes can be viewed and compared at the same time?
A scatter plot display in Explore allows you view outcomes based on what legend settings?
The scatter plot can only display properties against the factor of safety.
The plot axes can be customized with any filter option.
The scatter plot can only display properties based on the study objective.
The scatter plot has no customization options.
What is the requirement to be able to convert a mesh to a T-spline and begin working with it as a form?
The mesh must by a triangular mesh.
The mesh must be a quad mesh.
The mesh can’t be converted in Fusion 360.
The mesh must have less than 10,000 elements.
Where can a public share link be created from in Fusion 360?
Week 4 quiz
When you “Finish Form” after creating a box primitive, what is the resulting body in the design workspace?
Creating a creased edge on a form allows you to apply what in the design workspace? Select all that apply.
Which statement best describes the Boundary Fill feature as used in this course?
Boundary fill combines multiple surface bodies together as one.
Boundary fill is used to create a solid body from multiple solids and surfaces.
Boundary fill combines multiple solid bodies together as one.
Boundary fill is not used in this course.
What are the mode options when using “Erase and Fill”? Select all that apply.
Which feature allows you to create faces between two selected edge groups?
In order to have motion in design based on joints a body must be converted to what?
How does activating a component change the timeline?
Timeline will show all features in a design but highlight those belonging to the active component.
Timeline will remain the same.
Timeline will only show features created while a component is active.
Timeline will only show new features created.
Generative designs will require both preserve regions and obstacle regions. From the following list what geometry would constitute a preserve region for a wall mounted key rack? Select all that apply
A screw mounting location.
A body to represent a wall.
A decorative logo
Geometry required to hold a key ring.
Which of the following best describes the difference between shape optimization and generative design?
Shape optimization only accounts for static stress while generative design accounts for buckling and static stress.
Both methods produce identical results
Shape optimization requires a starting shape while generative will create the shape.
Shape optimization works in 3D while generative only works in 2D.
The creation of a digital assembly often times requires parts to move in relation to the assembly. This can be done with joints in Fusion 360 by controlling the location and degrees of freedom of the movement. If two parts of an assembly must remain fixed relative to each other, you can apply a rigid joint, but if you have to make multiple parts rigid relative to each other you can use which other option?
Rigid Component Group.
The creation of a generative model inside the edit model workspace will automatically create what inside of the generative design workspace?
A structural constraint.
A preserve region.
A generative study.
A structural load.
Which statement below best describes a load case?
The definition of loads and constraints acting on a design.
The amount of load the exterior of a design can withstand before failure.
The definition of only loads acting on a design.
The definition of only constraints acting on a design.
If a generative design containing multiple generative models appears to be missing geometry, what is a good first step?
Redefine loads and constraints.
Create a new generative model.
Check the applied appearances to ensure a model is still visible.
Use Edit Model to explore feature rebuild.
What selection is needed in order to create a construction midplane on a rectangle?
Two edges and a direction.
One face and an offset.
Two edges and a point.
Two parallel faces.
In a new generative study, what does the yellow arrow displayed on screen represent?
There is no yellow arrow.
A new applied load.
A place holder for load case 1.
The default “Sort by” option when entering Explore is set to what?
Factor of Safety.
How many cloud credits are required to export a 3D design?
If the link is broken on a distributed design component, what happens to that component?
The component is removed from the design.
Nothing, the link can’t be broken.
The component’s timeline and history are brought into the current design.
The component is converted to a base feature with no history.
How can a generative design study solution with outcomes be shared?
Create a Fusion Archive File and share it.
Invite users to that project.
Create a share link with the download option.
Generative study outcomes can’t be shared.
When creating a public share link, which version of the file will users be able to view and possibly download?
The user gets to decide which version
The version at the time the link was created.
The person creating the link decides which version.
Always the most current version.
Soft modification is used to control what?
The amount of influence movement has on surrounding geometry.
The radius of curvature in tight corners.
The amount you can move selected geometry.
There is no soft modification option.
Which form tool allows you to select a face and break it up into 4 smaller faces?
Which inspect tool colorizes the model based on radius of curvature?
Curvature Comb Analysis.
Component Color Cycling.
Curvature Map Analysis.
Which form display mode will show the smooth geometry and box geometry at the same time?
No such option.
Control Frame Display.
Smooth Box Display.
Box Frame Display.
Which mesh refinement option results in fewer triangles?
Peer-graded Assignment: Course Challenge–Peer Review