Modeling and Design for Mechanical Engineers with Autodesk Fusion 360 Answer Of Coursera Quiz. In this post you will get Correct Quiz & Assignment Answer of Modeling and Design for Mechanical Engineers with Autodesk Fusion 360

 

Modeling and Design for Mechanical Engineers with Autodesk Fusion 360

Offered By ”Autodesk”

Enroll Now

N.B. We attempted our best to keep this site refreshed for our clients for nothing. You can likewise contribute by refreshing new inquiries or existing inquiry answer(s). There are numerous inquiries on our site, it is difficult for us to check them consistently. It will be extraordinary on the off chance that you can assist us with updating the site. Just let us know if you find any new questions through mail or comment . We will attempt to refresh the inquiry/answer ASAP.

Week 1 quiz

 

1.
Question 1
Which of the following options would not likely factor into a sustainability design choice?

1 point

  • Service Life.
  • Color.
  • Weight.
  • Material.

2.
Question 2
When defining a user parameter, the units do not matter.

1 point

  • True
  • False

3.
Question 3
How can a user parameter be added to the favorites section.

1 point

  • Clicking the star icon next to the parameter.
  • Clicking the radio button next to the parameter.
  • Clicking the exclamation point icon next to the parameter.
  • There is no favorites section.

4.
Question 4
Sketch visibility options include profiles, dimensions and projected geometries.

1 point

  • True
  • False

5.
Question 5
To create a sheet metal flange you must have a closed profile sketch.

1 point

  • True
  • False

 

Week 2 quiz

 

1.
Question 1
What happens to the component browser icon when sub-components are added to it?

1 point

It changes to the letter A for assembly of components.

It changes color to blue.

Nothing

It changes to a group of small blocks.

2.
Question 2
A script is code that runs that can produce or modify geometry?

1 point

False.

True

3.
Question 3
As-built joints make use of the current component location when applying a joint.

1 point

False

True

4.
Question 4
Which right-click joint option allows you to play a single joints motion in an assembly?

1 point

Animate Joint.

Animate Assembly.

Animate Model.

Animate Motion.

5.
Question 5
Contact sets make use of assembly joints first and then look for physical interference.

1 point

True

False

 

 

 

Week 3 quiz

 

1.
Question 1
When taper angle is added during an extrude, what is the “pull direction” of the draft?

1 point

You must select a reference plane.

You must select a reference edge.

You can’t add taper during an extrude.

Normal to the sketch plane.

2.
Question 2
Which feature allows you to create a modeled thread? (select all that apply)

1 point

Revolve.

Hole.

Extrude.

Thread.

3.
Question 3
When you mirror a body, it will automatically combine with any other solid body it contacts.

1 point

False

True

4.
Question 4
What happens if you delete the face of a solid body while on the surface tools tab?

1 point

The face is removed and the solid becomes an open surface.

The face is removed and patched.

You can’t modify a solid while on surface tools.

The delete tool doesn’t work on the surfaces tab.

5.
Question 5
Draft can be added during feature creation or as its own feature.

1 point

True

False

 

 

 

Week 4 quiz

 

1.
Question 1
Working with forms captures a detailed history of the features used that can be modified or suppressed later.

1 point

True

False

2.
Question 2
Which of the following is not an option for the creation of a form body?

1 point

Box.

Face.

Loft.

Volume.

3.
Question 3
When can symmetry be added to a form body? (select all that apply)

1 point

After form body creation.

Symmetry can’t be used on a form body.

During Edit Form.

During form body creation.

4.
Question 4
Soft modification can help with the gradual transition of geometry during edit form.

1 point

False

True

5.
Question 5
Using the exact insertion type for edges and subdivisions often divides up an entire form body to maintain its current shape.

1 point

True

False

 

 

Course assessment

 

1.
Question 1
Which of the following is the correct representation of a 12mm user parameters after being linked to a dimension?

1 point

%: 12.00.

#: 12.00.

fx: 12.00.

Up: 12.00.

2.
Question 2
The symmetry constraints require 3 selections. First position, second position and a symmetry line.

1 point

False

True

3.
Question 3
What is the default operation type for an extrude when using a closed profile to create the first body in a design?

1 point

New Body.

Intersect.

Join.

New Component.

4.
Question 4
Closed profile sketches used for extrudes can’t contain any additional sketch entities.

1 point

False

True

5.
Question 5
When projecting model edges that are not on the active sketch plane where are those projections created?

1 point

On the TOP plane.

They are included in 3D.

Projected edges must be on the active sketch plane.

On the active sketch plane.

6.
Question 6
A component is required to create mechanical motion in Fusion 360.

1 point

True

False

7.
Question 7
Which of the following is the best option to copy a component without retaining a link to the original?

1 point

Copy/Paste New.

Copy/New.

Copy/Paste.

Copy/Paste Unique.

8.
Question 8
A distributed design link can be broken.

1 point

True

False

9.
Question 9
Which of the follow options allows you to manipulate the visual transparency of a component?

1 point

Display Control.

Transparency Control.

Visual Control.

Opacity Control.

10.
Question 10
How do you minimize an expanded group in the timeline?

1 point

Click the “+” button below it.

Click the “-“ button below it.

Drag the timeline marker before it.

Right click on the first feature and select “minimize”.

11.
Question 11
Ribs must have a closed profile sketch.

1 point

False

True

12.
Question 12
Which analysis type would be used to evaluate if a design contained an undercut that would restrict tool access?

1 point

Accessibility analysis.

Section view.

Draft analysis.

Minimum radius analysis.

13.
Question 13
What happens when a group of surfaces that form a closed region are stitched together?

1 point

They create a closed set of surfaces.

They are converted to a solid body and the surface body remains.

Nothing

They are converted to a solid body and the surface is removed.

14.
Question 14
A surface used for replacing the face of a solid must extend out further than the solid face.

1 point

False

True

15.
Question 15
The coil feature can only be created with a triangular cross section.

1 point

False

True

16.
Question 16
What short-cut key is used to extrude faces during edit form?

1 point

ALT.

CTRL.

TAB.

SHIFT.

17.
Question 17
Creased edged can’t be undone.

1 point

False

True

18.
Question 18
Which utility can be used to repair star points on a form body?

1 point

Repair Utility.

Repair Body.

Make Uniform.

Convert.

19.
Question 19
Inserting edges must be done at existing intersection points.

1 point

False

True

20.
Question 20
After finishing a form body it can no longer be edited.

1 point

True

False

 

 

By JAMD Bokhtier

This is JAMD Bokhtier's website.He is a passionate Marketer who dreams,talks,learns and teaches all about Marketing,the owner & the founder of "Life Style Consultant", a specialist in "Digital Marketing" and a Sophophilic.

error: Content is protected !!