Introduction to Mechanical Engineering Design Manufacturing with Fusion 360
Introduction to Mechanical Engineering Design Manufacturing with Fusion 360 Answer Of Coursera Quiz. In this post you will get Correct Quiz Answer of 3 Axis Machining with Autodesk Fusion 360
Introduction to Mechanical Engineering Design and Manufacturing with Fusion 360
Offered By ”Autodesk”
N.B. We attempted our best to keep this site refreshed for our clients for nothing. You can likewise contribute by refreshing new inquiries or existing inquiry answer(s). There are numerous inquiries on our site, it is difficult for us to check them consistently. It will be extraordinary on the off chance that you can assist us with updating the site. Just let us know if you find any new questions through mail or comment . We will attempt to refresh the inquiry/answer ASAP.
Week 2 quiz
1.
Question 1
What happens if you click on the team hub name at the top of the data panel?
1 point
- Nothing.
- All project folders are minimized.
- Team hub is opened on the web.
- Data panel is closed.
2.
Question 2
The right-click menu in Fusion 360 is referred to as the?
1 point
- Making Menu.
- Quick Access Menu.
- Marking Menu.
- Right-click Menu.
3.
Question 3
A component is required to create mechanical motion in Fusion 360.
1 point
- False
- True
4.
Question 4
Which of the follow options allows you to retain design comments and version history?
1 point
- Copy.
- Save as.
- None of the above.
- Move.
5.
Question 5
What type of member role is required to approve team join requests by default?
1 point
- Editor.
- Viewer.
- Project Admin.
- Team Admin.
Week 3 quiz
1.
Question 1
What color does a sketch entity change to when fully defined by dimensions and constraints?
1 point
Red.
Blue.
Green.
Black.
2.
Question 2
Which constraint allows two circles of different diameter to share the same center point?
1 point
Equal.
Concentric.
Colinear.
Parallel.
3.
Question 3
When adding draft to an extrude during feature creation what is the name of the feature parameter?
1 point
It must be done after the feature.
Pull.
Taper Angle.
Draft.
4.
Question 4
What is a joint limit?
1 point
The number of joints that can be applied to a model.
A numerical stop in a specific joints travel.
The degrees of freedom or DoF of a joint.
The speed at which a joint can rotate or translate.
5.
Question 5
A detailed drawing parts list is a list of components in a design.
1 point
False
True
Week 4 quiz
1.
Question 1
When selecting a contour edge in a 2D Contour toolpath, what does the red arrow represent?
1 point
Tool axis.
Rotation of tool.
It doesn’t have a meaning.
Side and direction of cut.
2.
Question 2
Simulate can change the color of stock where material has been removed.
1 point
False
True
3.
Question 3
What does NC stand for?
1 point
Numerical Control.
Non-Constraint.
Normal Cycle.
Nomenclature Creation.
4.
Question 4
All bodies and components should remain in a file for simulation even if they are not critical.
1 point
True
False
5.
Question 5
Cloning a simulation model can save time by reusing what data?
1 point
Simulation results.
Cloud credits.
Simulation study setup.
Cloning a simulation model does not save time.
Course final assessment
1.
Question 1
When viewing a design in Fusion Team Hub online you can tell if the design is in use by someone.
1 point
True
False
2.
Question 2
You can have access to multiple team hubs.
1 point
False
True
3.
Question 3
What is the term used for storing a local copy of a project?
1 point
Copy.
Backup.
Cache.
Download.
4.
Question 4
Design history is required to capture a components position.
1 point
True
False
5.
Question 5
Embedded share link options can be created in Fusion 360.
1 point
True
False
6.
Question 6
A solid revolve feature needs an axis of revolution and a?
1 point
Profile.
Path.
Material.
Color.
7.
Question 7
Which of the following is not a compute option for a circular pattern?
1 point
Adjust.
Optimized.
Identical.
Mirror.
8.
Question 8
What is the main difference between using 3D Print and Save As STL in Fusion 360?
1 point
Save as STL doesn’t allow for 3D Print Utilities.
Save as STL automatically selects the send to 3D print utility option.
3D Print automatically selects the send to 3D print utility option.
3D Print opens up MeshMixer.
9.
Question 9
A component is required for a transform or explode operation.
1 point
True
False
10.
Question 10
Local renders don’t allow control over the render quality.
1 point
True
False
11.
Question 11
Custom tools can be created in the sample tool library in Fusion 360.
1 point
True
False
12.
Question 12
A facing toolpath will cut down to the __________ unless otherwise specified.
1 point
Model bottom.
Model top.
Stock top.
Stock bottom.
13.
Question 13
Location of high stress concentration is represented by what color on a simulation colorbar?
1 point
Blue.
Green.
Yellow.
Red.
14.
Question 14
Load conditions define the physical _______ applied to a model.
1 point
Position.
Strain.
None of these.
Force.
15.
Question 15
The material applied to a design can be overridden in the simulation workspace for analysis.
1 point
False
True