Online Courses Support

CAM and Design Manufacturing for Mechanical Engineers with Autodesk Fusion 360 Answer

ByAdmin

CAM and Design Manufacturing for Mechanical Engineers with Autodesk Fusion 360 Answer Of Coursera Quiz. In this post you will get Correct Quiz Answer of CAM and Design Manufacturing for Mechanical Engineers with Autodesk Fusion 360

 

CAM and Design Manufacturing for Mechanical Engineers with Autodesk Fusion 360 Answer

Offered By ”Autodesk”

Enroll Now

N.B. We attempted our best to keep this site refreshed for our clients for nothing. You can likewise contribute by refreshing new inquiries or existing inquiry answer(s). There are numerous inquiries on our site, it is difficult for us to check them consistently. It will be extraordinary on the off chance that you can assist us with updating the site. Just let us know if you find any new questions through mail or comment . We will attempt to refresh the inquiry/answer ASAP.

Use “Ctrl+F” To Find Any Questions Answer. & For Mobile User You Just Need To Click On Three dots In Your Browser & You Will Get A “Find” Option There. Use These Option to Get Any Random Questions Answer.

Week 1 quiz

 

1.
Question 1
Which type of view is the first view created on a detailed drawing?

1 point

  • Default.
  • Model.
  • Base.
  • Detail.

2.
Question 2
What is the selection process needed for a center line?

1 point

  • First edge and axis.
  • First and second edge and a perpendicular reference.
  • First and second edge.
  • First edge and plane.

3.
Question 3
Symbols used in detailed drawings like Surface Texture are the same regardless of which drawing standard is being used.

1 point

  • True.
  • False.

4.
Question 4
Which of the following is not transferred from an animation storyboard to a detailed drawing?

1 point

  • Component visibility.
  • Component position.
  • View orientation.

5.
Question 5
A suppressed component in a design will be left off a parts list and its item number used by another component.

1 point

  • False.
  • True.

 

 

 

 

Week 2 quiz

 

1.
Question 1
Which inspect tool helps identify a required tool diameter limit?

1 point

Accessibility Analysis.

Section Analysis.

Minimum Radius Analysis.

Draft Analysis.

2.
Question 2
Dimension units must be entered in the same system as used in the document settings.

1 point

True.

False.

3.
Question 3
What is a fixture as it relates to machining?

1 point

There is no such thing as a fixture in machining.

A small part that attaches to a Mill’s controller.

A workflow needed to fix or repair a tool.

A component used to hold a complex shape for machining.

4.
Question 4
Bodies can be copied and pasted from one component to another.

1 point

True.

False.

5.
Question 5
Where are model adjustments such as the removal of chamfers made for production?

1 point

The edit model workspace.

The simplify workspace.

The manufacture workspace.

The design workspace.

 

 

 

 

Week 3 quiz

 

1.
Question 1
Which of the following is not information contained in a tool library?

1 point

Tool wear.

Tool feedrate.

Tool material.

Tool number.

2.
Question 2
Sample tools can be edited in the sample library.

1 point

False.

True.

3.
Question 3
If nothing is selected then a facing toolpath uses what information to define the machining boundary?

1 point

Model.

Contour.

Face.

Stock.

4.
Question 4
Toolpath simulation takes place in the simulation workspace.

1 point

False.

True.

5.
Question 5
Toolpath simulation can change the color of stock after each tool change.

1 point

True.

False.

 

 

Week 4 quiz

 

1.
Question 1
Soft jaws are used as a way to hold complex geometry.

1 point

False.

True.

2.
Question 2
What happens to a toolpath if a tool parameter such as its number is changed?

1 point

The toolpath has an error and must be regenerated.

The toolpath must be deleted and recreated.

The toolpath is fine, and no action is needed.

You can’t change tool parameters once they have been used.

3.
Question 3
Stock definition for a second setup can be taken from a previous setup.

1 point

True.

False.

4.
Question 4
A toolpath pattern will use the game coordinate system as the original toolpath.

1 point

True.

False.

5.
Question 5
Cam expressions can only be used once after they have been changed.

1 point

False.

True.

 

 

 

Course assessment

 

1.
Question 1
Center mark patterns can also create a center mark in the same feature.

1 point

True.

False.

2.
Question 2
Which type of dimension will give the longest distance between two points that are not vertical or horizontal in relation to each other?

1 point

Aligned.

Vertical.

Horizontal.

Angular.

3.
Question 3
Assembly drawings must contain every component in a design.

1 point

False.

True.

4.
Question 4
Where can parts list component descriptions be changed?

1 point

In the design workspace.

Directly in the parts list.

In the storyboard.

They can’t.

5.
Question 5
A custom drawing template can’t contain a custom title block.

1 point

False.

True.

6.
Question 6
Accessibility analysis can help find undercuts in a design that would require a special tool?

1 point

False.

True.

7.
Question 7
Once a component is created its origin must match the main coordinate system of the document.

1 point

True.

False.

8.
Question 8
What option must be selection in order for a component moved with an align feature to stay in its new location?

1 point

Capture position.

Lock.

Fix.

Ground.

9.
Question 9
New components created with boundary fill automatically have a rigid joint applied to them.

1 point

True.

False

10.
Question 10
All features on a design must be available to select for machine programming.

1 point

False.

True.

11.
Question 11
What location can a custom tool not be created?

1 point

Sample library.

Document.

Local library.

Cloud library.

12.
Question 12
Facing toolpaths do not contain a chip thinning option.

1 point

False.

True.

13.
Question 13
A chip breaking cycle type allows a drill bit to do what?

1 point

Plunge until it breaks.

Slow down the deeper it goes.

There is no chip breaking cycle.

Retract to help break chips.

14.
Question 14
How does a rigid tapping toolpath remove the tap from a hole?

1 point

The tool must drop all the way through the hole.

The tool diameter changes and is pulled straight out.

Rigid tapping can’t be done on a CNC Mill.

It reverses direction.

15.
Question 15
A second setup is created when a part is flipped over in a mill.

1 point

True.

False.

16.
Question 16
Machine configurations don’t contain specific information about a machine such as spindle speed or max feedrate.

1 point

False.

True.

17.
Question 17
What adaptive toolpath option would you activate to allow the toolpath machine a plane normal to the Z axis?

1 point

Plane Detection.

Flat Zone Detection.

No such option.

Flat Area Detection.

18.
Question 18
Which number below would represent G54 on a HAAS controller?

1 point

2.

1.

3.

4.

19.
Question 19
NC Program will allow you to export multiple setups at the same time.

1 point

True.

False.

20.
Question 20
Stepdown is a critical parameter needed to control the surface finish when machining an angled face.

1 point

False.

True.

 

 

 

Similar Posts