Cyber Security in Manufacturing Answer
Cyber Security in Manufacturing Answer Of Coursera Quiz. In this post you will get Correct Quiz Answer of Cyber Security in Manufacturing
Cyber Security in Manufacturing Answer
Offered By ”University at Buffalo”
N.B. We attempted our best to keep this site refreshed for our clients for nothing. You can likewise contribute by refreshing new inquiries or existing inquiry answer(s). There are numerous inquiries on our site, it is difficult for us to check them consistently. It will be extraordinary on the off chance that you can assist us with updating the site. Just let us know if you find any new questions through mail or comment . We will attempt to refresh the inquiry/answer ASAP.
Cyber Security in Manufacturing- Week 1 Quiz
1.
Question 1
True or False?
According to the 2017 Data Breach Investigation Report of Verizon, all data breaches were due to external attacks.
2 points
- True
- False
2.
Question 2
_______________ means that the system can be modified only by authorized parties and only in authorized ways.
2 points
Enter answer here
| Integrity |
3.
Question 3
Which of the following is not a step of Information Security Management System (ISMS) framework?
2 points
- Risk Management
- Risk Assessment
- Risk Creation
- Selection of appropriate controls
4.
Question 4
True or False?
The third line of defense in three line defense model performs operations such as internal and external audit.
2 points
- True
- False
5.
Question 5
True or False?
Using encryption on a network for communication can prevent eavesdropping of data package.
2 points
- True
- False
6.
Question 6
True or False?
Information Security Management Systems (ISMS) is an organized strategy to managing information in a secure manner.
2 points
- True
- False
7.
Question 7
_______________ states that a system should not grant permission based on a single condition.
2 points
- Information Security Management Systems (ISMS)
- Separation of privilege
- Interoperability
- Technical assistance
Cyber Security in Manufacturing- Week 2 Quiz
1.
Question 1
Which of the following is a type of virtualization? (Select all that apply)
2 points
Network virtualization
Desktop virtualization
Application virtualization
2.
Question 2
_____________ is the ability of people, machines and devices to communicate via a single platform or a network.
2 points
What do you think?
|
3.
Question 3
_________ is “a discipline concerned with the design, evaluation and implementation of interactive computing systems for human use and with the study of major phenomena surrounding them.
2 points
What do you think?
| Humane machine interaction |
4.
Question 4
True or False?
Human Machine interaction is the study of interactive interface between humans and machine.
2 points
True
False
5.
Question 5
True or False?
By using Internet Of Things (IOT), devices and machines can be monitored but cannot be controlled
2 points
True
False
6.
Question 6
True or False?
In requirements phase, minimum acceptable levels of security should be defined.
2 points
True
False
7.
Question 7
In _________ phase of Security Development LifeCycle (SDLC), all project functions are analyzed.
2 points
What do you think?
Your answer cannot be more than 10000 characters.
| Planning & Requirements |
8.
Question 8
In ____________ threats are intentionally designed to harm a system.
2 points
What do you think?
Your answer cannot be more than 10000 characters.
| Malware |
9.
Question 9
True or False?
Encapsulation means while developing a software, different functionalities are developed in the form of separate modules, instead of writing complete software as a single file.
2 points
True
False
10.
Question 10
Which of the following functions are offered by Secure/Multipurpose Internet Mail Extension?
2 points
Signed data
Pretty good privacy
Identification step
Verification step
Cyber Security in Manufacturing- Week 3 Quiz
1.
Question 1
Arrange following options in order of security program for a SCADA system:
A. Perform risk and vulnerability assessment
B. Define responsibilities
C. Define objectives
D. Define mitigation controls
2 points
A. Perform risk and vulnerability assessment
then
B. Define responsibilities
then
D. Define mitigation controls
then
C. Define objectives
B. Define responsibilities
then
A. Perform risk and vulnerability assessment
then
D. Define mitigation controls
then
C. Define objectives
B. Define responsibilities
then
C. Define objectives
then
A. Perform risk and vulnerability assessment
then
D. Define mitigation controls
2.
Question 2
True or False?
If a USB was plugged into a Stuxnet worm-affected system, the worm would infiltrate the USB device and spread to any subsequent computing systems that the USB was plugged into.
2 points
True
False
3.
Question 3
Which of the following is an entity of supply chain?
2 points
Supplier
Retailer
Manufacturer
Supplier, Retailer and Manufacturer
4.
Question 4
True or False?
Supply chain security provides security against security threats including terrorism
2 points
True
False
5.
Question 5
Which one item provides the most security concern in mobile security device usage?
2 points
OS updates
Connecting to a trusted website
Downloading from safe platforms
Strong authentication practices
6.
Question 6
True or False?
Service set identifier is a hardware device which helps connect local mobile or wired devices to a wireless network.
2 points
True
False
7.
Question 7
True or False?
Weak authentication is a security concern for cloud computing on providers end.
2 points
True
False
8.
Question 8
_________________ is a type of Internet-based computing that provides shared computer processing resources such as CPU, memory, disk space or software to remotely based computer systems.
2 points
What do you think?
Your answer cannot be more than 10000 characters.
| Cloud computing |
9.
Question 9
True or False?
Watermarking allows sharing of files or data over the internet such that it can be accessed only by legitimate users with valid encryption-decryption keys.
2 points
True
False
10.
Question 10
_________ attack refers to security breaches by an authorized personnel.
2 points
What do you think?
| Insider at task |
Cyber Security in Manufacturing- Week 4 Quiz
1.
Question 1
A _________ is a potential or actual undesirable event that may be malicious or accidental.
2 points
Enter answer here
| a threat |
2.
Question 2
True or False?
Threat model can not be implemented into an existing security system.
2 points
True
False
3.
Question 3
___________ is the ability of a system or component to perform its required functions under stated conditions for a specified period of time.
2 points
Enter answer here
| Virus/ Malware |
4.
Question 4
True or False?
Reliability deals with the internal functioning or updates of a system, while security deals with system threats and vulnerabilities.
2 points
True
False
5.
Question 5
Which of the following level activities of an organization’s system is targeted by Data Leaks Prevention (DLP)? (Select all that apply).
2 points
Client Level
Network Level
Storage Level
6.
Question 6
True or False?
At present, there are no open source tools for Data Leaks Prevention.
2 points
True
False
7.
Question 7
Which of the following is a type of intruder?
2 points
Masquerader
Clandestine user
Misfeasor
Masqueraders, Clandestine users, and Misfeasors are all examples of types of intruders
8.
Question 8
True or False?
Nowadays, systems which are 100% secure are available in market.
2 points
True
False
9.
Question 9
Which of the following is the correct order of steps of breach recovery?
Containment of the attack
Follow up of the attack
Monitoring for an attack
Identification of the attack
Recovery from the attack
Eradicate impact of attack
2 points
1 → 2→ 3 → 4 → 5 → 6
6 → 5 → 4 → 3 → 2 → 1
3 → 4 → 1 → 6 → 5 → 2
2 → 1 → 6 → 4 → 4 → 5
10.
Question 10
________________ is a procedure to collect information and digital evidences about any cyber crime so as to present them to law enforcement agencies.
2 points
What do you think?
| Cyber forensics |
